Advanced Leak Test Solutions-Reliable, Accurate, Repeatable
Sciemetric's 3300 Leak Test System outperforms conventional leak test systems by decreasing test cycle time and detecting manufacturing defects other systems cannot find. One of the most advanced testing tools on the market today, yet easy to setup and use, the 3300 is a proven leak detection system with a solid reputation for:
- Improving gage repeatability & reproducibility (gage R&R)
- Improving the quality of shipped parts
- Decreasing cycle time
- Increasing productivity by minimizing false rejects
Reduced Cycle Times, Increased Accuracy and better Gage R&R
Traditional leak test systems rely on minimal data capture or predictive analysis to evaluate the quality of a cavity. Although this method reduces cycle time, it typically sacrifices the reliability and repeatability of results.
Sciemetric's 3300 Leak Test System instead relies on advances in fill and pressure control technology to decrease test cycle time. The technology uses closed loop pressure control to fill and maintain pressure in the cavity.
Signature Analysis Provides Superior Process Insight
Unlike other leak test systems, the 3300 Series uses Sciemetric's advanced Signature Analysis techniques to capture and analyze the entire leak test waveform in real-time. Using all the data points on the curve leads to increased accuracy and better Gage R&R for both pressure decay and mass flow leak testing. The system also automatically identifies and learns the key elements of the leak test. The values from these key elements are compared against acceptable limits to determine pass or fail status.
- Fast Results: The 3300 Leak test system allows manufacturers to achieve reliable and repeatable results in a fraction of the time traditional leak detection methods require.
- Reliable Results: Sciemetric's proprietary signature analysis technology finds defects that other leak test systems can not find. Fewer false accepts leads to improved quality for manufacturers, while the ability to minimize false rejects improves manufacturer efficiency and yield.
- Lower overall cost than most competitive systems
Defects Detected with 3300 Leak Test System
- Blockage in part under test
- Gross leaks
- Fine leaks, cracks in seals
- Gross defects, missing part, wrong part, crimped lines
- Rolled seals, rolled O-rings
- No part in place
The system can be further configured to detect other defects. For one or two channel leak tests, take a look at sigPOD Leak. To see the 3300 at work, click here to view our application notes.