Sciemetric

IIoT / Smart Manufacturing

Checklist: Choosing a manufacturing data management and analytics platform that delivers real ROI

Contributed by: Sciemetric Staff
November 16, 2021
Man looking at data

Having collected data is not of much help when you lack the tools to retrieve and analyze the data to quickly trace root cause when quality issues impact production. Here are some key considerations that will help you find a manufacturing data management and analysis platform that will get your data working for you. 

5 considerations when automating your quality control process on the manufacturing line

Contributed by: Ron Pawulski - Account Manager
October 29, 2021
Man on production line using laptop

This blog post discusses key considerations that will help guide you to the best solution suited to your needs when considering a new system to automate your quality control process for improved product quality and overall line efficiency.

Considerations when digitizing paper-based records, automating defect detection and quality control on the production line

Contributed by: Sciemetric Staff
May 21, 2021
Operator with digital input form on production floor

Paper-based data management and reporting workflows tend to limit the line’s capacity and scalability, and are prone to manual error. When these workflows start creating noticeable bottlenecks on your line, it’s time to look for a more streamlined solution. Learn more.

Monitoring for weld expulsion: A prime cause of weak welds, defects

Contributed by: Ron Pawulski - Account Manager
March 17, 2021
Battery in vehicle

A common quality issue at the weld station on a production line is expulsion, which can result in a weak weld joint. By applying process monitoring and digital process signature analysis, Sciemetric enables manufacturers to identify weld expulsion before the part leaves the station. Learn how.

Set up your line for success in 2021: Lessons for improving product line efficiency and effectiveness

Contributed by: Sciemetric Staff
December 17, 2020

Due to the circumstances of 2020, manufacturing budgets and timelines have been under an ever-increasing microscope. This sentiment certainly rings true when we looked back at the most-read content from our blog over 2020, where improving efficiency and effectiveness seem to be top-of-mind. Set your line up for success in 2021 with these tips from our most-read posts of 2020, here!

Go beyond station checks to improve product quality and line efficiency: The value of process monitoring and data analytics

Contributed by: Shankar Krishnamurthy - General Manager, Sciemetric
November 30, 2020
Shankar, author, looking at data on the plant floor

When manufacturers consider the concept of quality control on their production lines, they often think that a quality check station is enough. But what happens when a part fails the test? This blog post discusses how to improve product quality and line efficiency by going beyond station checks.

Machine data versus part data: pros and cons | Manufacturing Data Series, Part 3

Contributed by: Rob Plumridge
October 6, 2020
Manufacturers looking at data

When we talk to manufacturers, sometimes we find that the difference between machine data and actual part production data has gone unnoticed. While both have their role to play, one is not a substitute for the other, as they don’t measure the same things. This blog post discusses the pros and cons of these different data systems to help you decide what's right for you.