resources
Application Note: Verification of Piston Type & Orientation Using Laser Scanning
A major automotive integrator was unable to test any one of four engine blocks right after piston insertion and defects being found after final engine assembly were causing expensive teardowns. Sciemetric easily installed a test and analysis system using laser scanning to verify the engine blocks to ensure correct positioning and accurately find defects such as under or oversized and bent pistons. Read the Application Note to learn more.
Tags:resources
Application Note | Power Steering Pump: Vane Defect Detection Using Signature Analysis
A power steering pump manufacturer required a solution that accurately detected the most subtle vane defects prior to final assembly to avoid costly tear downs due to the objectionable noise and vibration (NVH) they can create. A Sciemetric test and analysis system was installed and configured to observe the pressure waveform, allowing easy detection of missing, nicked, bent and slightly stuck vanes. Read the Application Note to learn more.
Tags:resources
Application Note: Transfer Line Load Monitoring
The transfer lines are often subjected to substantial loads and forces during the transfer process. Recently, a transfer line that was being used to transfer automobile bodies on a body weld line began experiencing problems with pin shear as a direct result of the force required to move the parts. A Sciemetric test and analysis system was used and provided a quick and easy solution to the problem. The system was configured to monitor and collect for fifteen seconds the compression and tension force data from a load cell configured on a transfer line (the entire process occurred in eleven seconds). Read the Application Note to learn more.
Tags:resources
Automatic Transmission Manufacturing Line Blueprint
For over 30 years, Sciemetric has been leading the development of technologies for front-line defect detection on the manufacturing production line through in-process testing (IPT). IPT (In-process testing) is about catching issues at the stations where they happen, when the cost of resolving them is the lowest. This blueprint provides examples of where and how Sciemetric technology can be used across the automatic transmission manufacturing line to improve product quality and provide traceability.
Tags:product
QualityWorX CTS DataHub
The QualityWorX CTS DataHub is a turnkey platform that consists of a host PC and Sciemetric Studio analytics software. It allows you to start collecting and analyzing real-time data from up to five CTS leak test instruments or Sciemetric sigPOD in-process test monitors within minutes of setup.
Tags:resources
Sciemetric EDGE 412 双载体 数据表
Sciemetric EDGE 412 双载体配有两个可安装在 IP65 级无风扇机箱内的 EDGE 400 模块,因此,可在恶劣的工业环境中部署。通过单一以太网供电(PoE)连接为载体提供通信和电源,这大大简化了接线和安装操作。这两个模块都使用 6 线同步总线,以共享实时计时和数据。
Tags:resources
Sciemetric EDGE 431 Datasheet
Packed with configurable logic blocks including counters, comparators and programmable pulse generators, the Sciemetric EDGE 431 is a intelligent digital I/O device. Read the datasheet to learn more.
Tags:resources
Video: Sciemetric EDGE demonstrates flexibility—monitoring a popcorn machine!
In this video, Sciemetric's Product Launch Manager, Robert Ouellete, discusses the flexible capabilities of the Sciemetric EDGE process monitoring solution as presented at The Assembly Show 2019 in Rosemont, IL, connected to a popcorn machine monitoring kernels popped per cycle.
Tags:resources
Application Note: Loctite® Adhesive Dispense Monitoring
After numerous leaks and the threat of warranty claims, this manufacturer needed an accurate monitoring solution to catch bubbles causing the leaks at their Loctite adhesive dispense station before the parts moved further down the line. Learn how Sciemetric solved their problems.
Tags:resources
Sciemetric EDGE 403 接口和 414 四载体 数据表
Sciemetric EDGE 403 接口和 Sciemetric EDGE 414 四载体为您提供期盼已久的可扩展通道数据采集方案。通过堆栈 Sciemetric EDGE 414 四载体,单底盘最多可连接 40 个 Sciemetric EDGE 模块,并向其供电,可实现单电源连接和单网络连接的高通道计数同步和异步采。需要额外的通道?没问题!
Tags: