Main navigation

Sciemetric

Torque testing finds the hidden problems

Torque is the angular force required to turn something, whether it’s a fastener such as a nut or screw, or an assembly such as an electric motor. In torque testing, the amount of force applied to move an object is measured and analyzed for comparison to a baseline. Any anomalies in torque characteristics can indicate a quality issue. With Sciemetric’s off-the-shelf technology, these anomalies can be used to trace the root cause of a variety of defects.

Read more about the basics of torque testing from our experts in the pages of Assembly Magazine.


Data-driven insight that makes the most of your torque test

Sciemetric’s sigPOD is an in-station part test and process monitoring and data acquisition system that enables manufacturers to catch production problems. On many production lines, fastening and run-down operations are monitored only for verification that a specified torque was reached. sigPOD goes far beyond this basic pass/fail determination to monitor and collect data from every millisecond of the process.This provides much more granular and effective defect detection. If it takes longer than usual to reach a specified torque, if it takes more or less force, sigPOD will know.

Digital signatures for torque provide a picture of the process

Sciemetric’s technology is based on digital process signatures, or waveform analysis, which analyzes all the critical points of the operation to determine a pass/fail decision. Signature analysis provides a visual representation of the process.

Learn more about sigPOD

sigpod torque signature


Consolidate production fastening data with other station data for better visibility

Consolidate data

Fastening and rundown stations often have monitoring solutions provided by the tool supplier. The valuable part data collected by these systems often reside in silos. Sciemetric’s QualityWorX enables manufacturers to store all part data from across the assembly line into a centralized database. Unique manufacturing analytics software allows the analysis of the waveforms, comparison and correlation of stations and more.

Go to QualityWorX


Torque testing in manufacturing – application stories

Diagram showing typical torque digital signatures

Testing electric motors

Torque testing is a critical part of the functional test of an electric motor. Sciemetric’s solution identifies faulty motors based on ‘High Potential’, ‘Minimum Start Voltage’, ‘Pull-up Torque’ and ‘No-load’ tests. Key components of the testing and the related waveforms include:

  • Rotary testing
  • Encoder sampling
  • Torque signature vs. angle
  • Current testing

See other examples

Torque to turn

Short block torque-to-turn testing

A major engine manufacturer was experiencing customer complaints and costly warranty repairs and quickly required a solution that could detect defects early in the Short Block assembly process, specifically defects caused by crankshafts.

Sciemetric’s Short Block Crank Torque- to-Turn test measures the torque as the crank is rotated, applying advanced algorithms for consistent and reliable detection of defects such as contaminated bearings, debris, incorrect fit, bent or nicked cranks, etc.

Read the application note